This dataset and its collection methods are described in
When referencing this material, please include the above citation and the standard citation for PhysioNet:
The FECGSYNDB is a large database of simulated adult and non-invasive fetal ECG (NI-FECG) signals, which provides a robust resource that enables reproducible research in the field. The data is generated using the FECGSYN simulator (visit website).
The simulator represents maternal and foetal hearts as punctual dipoles with different magnitudes and spatial positions. This current version obtains foetal–maternal mixtures by treating each abdominal signal component (e.g. foetal/maternal ECG or noise signals) as an individual source, whose signal is propagated onto the observational points (‘electrodes’). Therefore this database is able to provide separate waveform files for each signal source.
The modeled volume conductor, sampled from 34 channels (32 abdominal and 2 maternal ECG reference channels), is shown in Fig. 1 below (taken from Andreotti et al., 2016).
Figure 1. Side (a) and upper (b) view the of volume conductor. Positions of foetal (small sphere, blue) and maternal (larger sphere, red) hearts shown.
For this database, ten different pregnancies were simulated. For each simulated pregnant subject, seven different physiological events were considered and simulated as described below:
|Baseline||Abdominal mixture (no noise or events)|
|0||Baseline (no events) + noise|
|1||Foetal movement + noise|
|2||MHR /FHR acceleration / decelerations + noise|
|3||Uterine contraction + noise|
|4||Ectopic beats (for both foetus and mother) + noise|
|5||Additional NI-FECG (twin pregnancy) + noise|
On top of this, there were five different levels of additive noise and 5 repetitions for each combination of settings.
Overall a total of 10 (simulated pregnants) x 7 (cases) x 5 (SNR levels) x 5 (repetitions) = 1750 synthetic signals were produced, totaling 145.8 hours of multichannel data with 1.1 million fetal peaks. Each simulation had a duration of 5 minutes, and was sampled at 250 Hz with a 16-bit resolution. For more technical details, see section 2.1 of Andreotti et al., 2016.
Each subdirectory subXX/snrYYdb/ includes a set of data for simulated pregnancy XX and SNR level YY.
Inside each subdirectory are numerous files in WFDB format. The files names are in the form
|XX||=||simulated pregnancy number [01 to 10].|
|YY||=||SNR level [00, 03, 06, 09, 12] dB.|
|Z||=||repetition number [1 to 5].|
|WW||=||[c0 to c5], or empty for the baseline case, representing the cases shown in the above section.|
|VVVV||=||Fetal ECG [fecgN] where N is the fetus number, maternal ECG [mecg], or [noise].|
The file extensions are in the standard WFDB MIT format:
.hea for header files, and
.dat for signal files. As shown in Fig. 1 above, channels 1–32 are the abdominal FECG channels and channels 33-34 are the maternal reference ECG channels. Header files also contain additional model parameters described in table 2 of Andreotti et al. The units are listed as 'nu' for no units since the signals are simulated, though their amplitudes do correspond to the 1–2mV amplitudes of normal MECG signals. Annotation files
.qrs give machine generated QRS locations of their respective signals.
If you have any questions, suggestions or want to know more about FECGSYNDB, do not hesitate to contact us .
Name Last modified Size Description
Parent Directory - sub02/ 2016-04-26 14:00 - sub03/ 2016-04-26 14:00 - sub04/ 2016-04-26 14:00 - sub05/ 2016-04-26 14:00 - sub06/ 2016-04-26 14:00 - sub07/ 2016-04-26 14:00 - sub08/ 2016-04-26 14:00 - sub09/ 2016-04-26 14:00 - sub10/ 2016-04-26 14:06 - RECORDS 2016-04-26 19:22 273K list of record names ANNOTATORS 2016-04-28 10:22 36 list of annotators images/ 2016-04-28 11:06 - MD5SUMS 2016-04-29 09:33 178 SHA1SUMS 2016-04-29 09:33 210 SHA256SUMS 2016-04-29 09:33 306 sub01/ 2016-04-29 09:36 - DOI 2016-05-06 14:56 20
If you would like help understanding, using, or downloading content, please see our Frequently Asked Questions.
If you have any comments, feedback, or particular questions regarding this page, please send them to the webmaster.
Comments and issues can also be raised on PhysioNet's GitHub page.
Updated Friday, 28 October 2016 at 16:58 EDT