This directory contains sources for the XView and olgx libraries, an X Window System graphical user interface toolkit needed by WAVE and SEMIA. Also available here are binaries for several popular platforms.
An outstanding resource for information about these libraries is a set of three books available freely from O'Reilly's Open Books Project.
There is no 64-bit version of XView, and it is unlikely that one will be produced. Although a port of XView to 64-bit architectures was reported in progress as of April 2006, this effort appears to have stalled. Unfortunately, the changes that would be required to create a 64-bit version are very extensive, requiring an effort that would be similar to starting from scratch. Fortunately, 64-bit platforms can run XView in 32-bit compatibility mode.
Beginning in version 10.6, the standard Xorg server is severely incompatible with XView. This server is standard in Fedora 11 and Ubuntu 9.04, among others. The symptom of incompatibility is that the X server freezes if any XView control is activated by a mouse click. (If this happens to you, you may be able to regain control of your X session by killing the XView client, for example by logging in remotely, or by switching to a text console.) The cause of the problem appears to be a broken interaction between the X server and the XView Notifier (event dispatcher).
It is possible to work around this problem by adding the -Wfsdb option to the command line. This option, which disables full-screen grabs, is interpreted by the XView library initialization code, not by the application code, so it should work for all XView applications. See this page for details and other suggested workarounds. Thanks to Michael Buro for this tip!
Beginning in version 6.10 (October 2009), WAVE includes code that disables full-screen grabs, thus avoiding this problem.
XView applications need a few resources commonly provided by X servers. Since an XView application running on a remote machine may be displaying its output on a local machine, it is important to understand that the local machine is running the X server, and that it needs to provide these resources:
Xview applications require the Open Look glyph fonts on the X server. Although these fonts are usually installed by default, they may be missing on some platforms (as on Fedora 10, for example). If the Open Look glyph fonts cannot be read by the X server at run time, XView applications will quit after emitting an error message similar to:
(Font package) (Cursor package) XView warning: invalid object (not a pointer), xv_get X Error of failed request: BadFont (invalid Font parameter) Major opcode of failed request: 94 (X_CreateGlyphCursor)If this happens, install the missing fonts. On Fedora (and possibly other platforms), use this command to do so:
yum install xorg-x11-fonts-miscOtherwise, download the files located in the fonts subdirectory, and install them in your X server's miscellaneous fonts directory (the location varies but may be /usr/share/X11/fonts/misc/ or /usr/X11R6/lib/X11/lib/fonts/). You may need to run fc-cache (or fontconfig) after installing the Open Look fonts manually.
The default text fonts expected by all XView applications are the Lucida fonts contained in lucida-fonts.tar.gz. Most X11 servers come with these fonts, but if they are missing, you will most likely see
(Font package) (Font package) (Server package)when you try to run an XView application. If this happens, you have two choices:
wave -r mitdb/200 -a atr -fn fixedThe font named fixed has been present since the very first release of X11. You may substitute any other installed font (use xlsfonts to find out what you have), but "fixed" should always work.
yum install xorg-x11-fonts-100dpi xorg-x11-fonts-ISO8859-1-100dpi \ xorg-x11-fonts-75dpi xorg-x11-fonts-ISO8859-1-75dpiOn other platforms, the packages containing these fonts may have different names; if you cannot locate suitable packages, download and unpack lucida-fonts.tar.gz, run mkfontdir in each of the two directories (75dpi and 100dpi created by doing so, and then add these directories to the X server's font path (for example, using
xset +fp /path/to/75dpi xset +fp /path/to/100dpi
The binary XView RPMs in the i386-* subdirectories of this directory are usable with Fedora Core and with Red Hat Linux 4.0 through 9.0 (and later) on Intel x86, and those in the alpha subdirectory with RHL 6.x and 7.x on Alpha systems. Early versions of Red Hat Linux came with binary XView RPMs that were compatible with the X11 and libc packages in those earlier versions. To install XView under Fedora or Red Hat Linux download xview-* from the appropriate directory (i386-5.x for RHL 4.x or 5.x on Intel, i386-6.x for RHL 6.x on Intel, i386-7.x for RHL 7.x on Intel, i386-8.x for RHL 8.x or 9.x, i386-Fedora for Fedora on Intel, or alpha for RHL 6.x or 7.x on Alpha), then install XView using the command
rpm -Uvh xview-*
If you are using Red Hat Linux 5.0 or 5.1, we recommend that you upgrade to a current version if possible. If this is not possible, you should link against the static versions of the XView libraries (libxview.a and libolgx.a) rather than the dynamic versions, which have known incompatibilities with Red Hat Linux 5.0 and 5.1.
XView packages for a number of other RPM-based GNU/Linux distributions,
including x86 and PPC Mandriva 9.x and 10.x, and x86 SuSE 9.x, can be obtained
Important note for Fedora and other version 2.6 kernel distributions
Please be sure to use the i386-Fedora (or i386-FCn) RPMs if you can, or rebuild XView for your platform from the most recent sources in the src subirectory.
Two types of ptys (pseudo-terminal devices) have been supported by most GNU/Linux distributions until recently. Traditionally, XView has used BSD-style ptys to implement text windows and terminal emulator objects such as WAVE's analysis commands window. Most recent GNU/Linux distributions based on version 2.6 kernels, including Fedora Core 2 and later, support only the newer UNIX98 (SVR4-style) ptys. Although the i386-8.x XView RPMs can be installed on these platforms, they will cause XView-based applications to crash whenever a text or terminal window is opened, generally with an error message such as All pty's in use. The newer i386-Fedora RPMs use UNIX98 ptys and therefore do not cause this problem; they have been compiled from xview-3.2p1.4-21.fc5.src.rpm (for versions FC5-FC6) or xview-3.2p1.4-21.1.fc8.src.rpm (for versions FC7 and later).
If you are using Fedora 8, 9, or 10, or any distribution that includes X.org's libX11 version 1.1, you will need to use the i386-FC8 RPMs (or to compile XView from the sources included in xview-3.2p1.4-21.1.fc8.src.rpm) to avoid XAllocID runtime failures in XView applications. These RPMs are also compatible with the earlier libX11 version 1.0 (as in Fedora 7).
Debian and Ubuntu packages for XView are available from the usual sources (e.g., www.debian.org in the stable, testing, and unstable branches under X Window System software); look for xviewg, xviewg-dev, xview-clients, and xview-examples. Debian XView packages are available for most 32-bit CPU types supported by Linux, including Alpha, ARM, i386, HP-PA, 680x0, big- and little-endian MIPS, PowerPC, S/390, and Sparc.
On 32-bit Debian (or Ubuntu, etc.): Download and install the packages by:
sudo apt-get install xviewg xviewg-dev(The other packages, xview-clients and xview-examples, are optional and not needed in order to compile XView applications.)
On 64-bit Ubuntu: Defective 64-bit packages are available in the Ubuntu repositories. Avoid using them, because the 64-bit XView library will not work at all and will cause crashes if linked to applications. The best choice on 64-bit Ubuntu is to disable use of the Ubuntu repositories temporarily and enable the Debian repositories in /etc/apt/sources.list, and then to get and install the 32-bit xviewg and xview packages.
The file xview-G3-G4-G5.pkg.tar.gz (in the macos-x directory) was contributed by Prof. Logan Donaldson of York University (Toronto), who ported XView 3.2 to Mac OS X 10.0. This package, also available here, works on later versions of Mac OS X, but there are unsolved problems in compiling the XView sources under Mac OS X 10.1 and later versions.
Before attempting to install XView under Mac OS X, be sure that X11 and its software development kit have been installed. X11 for Mac OS X can be downloaded from http://www.apple.com/downloads/macosx/apple/x11formacosx.html. The X11 SDK is included in the packages folder of Apple's XCode developer tools, which can be downloaded from http://developer.apple.com/tools/xcode/. Both X11 and XCode are also included in current Mac OS X CD sets.
Alternative X11 packages are available from Fink (http://fink.sourceforge.net) and from the XDarwin project (http://www.xdarwin.org/). If you choose one of these alternative X11 packages, install the corresponding software development kit for it.
Before running any XView (or other X11) clients, you must start the X
server, typically by double-clicking on the X11 icon found in
Utilities/Applications. Doing this also opens a terminal window, from
which you can run X11 and XView clients. If you have a one-button
mouse, simulate a right click in an X11 or XView client by pressing
and holding the apple key while clicking. Simulate a middle button
click by pressing and holding the option key while clicking.
Thanks to Ben McClelland for reporting that
Cygwin 1.7 includes working XView
packages. Simply select the xview-devel package in Cygwin's
setup tool and all of the necessary components will be installed
painlessly. We no longer recommend using the XView packages available
here with any modern version of Windows; they may be useful if you are
still using Windows 95, 98, or ME, which are not compatible with
Although XView was originally developed by Sun, it has been deprecated and the last XView packages released by Sun as the OpenWindows SDK were for Solaris 8. These have been repackaged and extended for Solaris 9 and 10 (both Sparc and x86 versions) by Vincent Cojot as the OpenWindows Augmented Compatibility Environment (OWacomp); follow these instructions to download and install OWacomp for current versions of Solaris.
On older versions of Solaris, and on SunOS, install Sun's OpenWindows SDK.
If your operating system and CPU combination does not appear in this list, no binaries are currently available for it. Try a Google search for "xview hpux", "xview irix", etc., or check in the comp.windows.open-look and alt.toolkits.xview newsgroups to see if an XView port is available for your platform. Alternatively, you may wish to try compiling your own binaries from the free sources available in the src directory.
Your contributions are welcome! If you have created working XView libraries
for other operating systems or CPUs, please contact us to arrange for your
binaries to be posted here.
The src subdirectory contains the sources that were used to compile the various XView packages available in the other subdirectories.
The most recent set of sources (xview-3.2p1.4-18c.tar.gz) contains the UNIX98 pty patches, additional updates from Debian, and further patches by Isaac Henry of PhysioNet to permit the package to be compiled under MS-Windows. Use this as a basis for further work.
The source RPMs were used to compile the older versions of XView for GNU/Linux that are available here.
Name Last modified Size Description
Parent Directory - HEADER.shtml 08-Jul-2013 14:56 15K shell script alpha/ 22-Oct-1999 12:13 - cygwin/ 15-Mar-2005 12:23 - fonts/ 13-Jan-2009 15:45 - i386-5.x/ 31-Jan-2000 00:13 - i386-6.x/ 31-Jan-2000 00:00 - i386-7.x/ 31-Oct-2002 08:21 - i386-8.x/ 31-Oct-2002 01:03 - i386-FC1/ 13-Dec-2004 18:29 - i386-FC2/ 13-Dec-2004 18:29 - i386-FC3/ 13-Dec-2004 18:29 - i386-FC4/ 04-Apr-2006 14:02 - i386-FC5/ 19-Nov-2007 21:18 - i386-FC6/ 19-Nov-2007 21:18 - i386-FC7/ 19-Nov-2007 21:19 - i386-FC8/ 19-Nov-2007 21:19 - i386-Fedora/ 19-Nov-2007 21:19 - i386-RHEL3/ 04-Apr-2006 14:48 - lucida-fonts.tar.gz 09-Mar-2009 11:00 2.8M gzip-compressed tar archive macos-x/ 15-Mar-2005 12:24 - src/ 19-Nov-2007 21:29 -
|Send feedback about this page to PhysioNet|