#! /bin/sh
# file: configure G. Moody 24 May 2000
# Last revised: 28 November 2018
# Configuration script for the WFDB Software Package
# This script was not generated using 'autoconf'. If you can implement
# autoconf input files for a 'configure' that does what this one does,
# please send them to wfdb@physionet.org for inclusion in a future
# version of this package.
# Note that any -m options (although parsed below) are currently ignored,
# except on x86_64 Linux, where they are prefixed to CFLAGS. The help
# text below documents only -m32; see the gcc manual for other -m options.
# Defaults (overridden by --interactive):
INTERACTIVE=no
LIBTYPE=dynamic
DIR=/usr/local
MANDIR=unknown
LIBDIR=unknown
HOST=
MFLAGS=
ARCHLIST=
NETLIB=unknown
WAVE=unknown
OWHOME=/usr/openwin
LC_ALL=C
export LC_ALL
# Read and process command-line arguments
for i in $*
do
case $i in
--dynamic) LIBTYPE=dynamic ;;
-i|--interactive) INTERACTIVE=yes
LIBTYPE=
DIR=
MANDIR= ;;
-m*) if [ "x$MFLAGS" = x ]
then
MFLAGS=$i
else
MFLAGS="$MFLAGS $i"
fi ;;
--enable-arch=*) a=`echo $i | sed 's/[-a-zA-Z0-9]*=//' | tr , ' '`
ARCHLIST="$ARCHLIST $a" ;;
--host=*) HOST=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` ;;
--mandir=*) MANDIR=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` ;;
--prefix=*) DIR=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` ;;
--libdir=*) LIBDIR=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` ;;
-q) ;; # ignored
--shared) LIBTYPE=dynamic ;;
--static) LIBTYPE=static
SYSLIBS=dynamic ;;
--static_only) LIBTYPE=static
SYSLIBS=static ;;
--without-cygwin) NOCYGWIN=yes ;;
--without-netfiles) NETLIB=none ;;
--with-libcurl) NETLIB=libcurl ;;
--without-xview) WAVE=0 ;;
--with-xview=*) OWHOME=`echo $i | sed 's/[-a-zA-Z0-9]*=//'`
WAVE=1 ;;
*) cat <<EOF
usage: $0 [options]
Options:
--dynamic make a shared (dynamically linkable) WFDB library
if possible [default]
--help print this message
--interactive ask about library type and installation directories
-m32 on 64-bit Linux, force compilation in 32-bit mode
--mandir=MANDIR install man pages in MANDIR
--prefix=PREFIX install files in PREFIX [default: $DIR]
--shared (same as --dynamic)
--static make a static WFDB library (do not make a shared
library even if possible)
--static_only link WFDB applications to static libraries only
(assumes --static; compilation may fail if any
necessary libraries are available as shared libraries
only)
--without-cygwin on Cygwin, compile binaries that do not link to the
Cygwin DLL. WAVE will not be built.
--without-netfiles disable NETFILES even if libcurl is available
--with-libcurl enable NETFILES via libcurl [default]
--without-xview disable WAVE even if XView is available
--with-xview=PREFIX use XView libraries and headers installed in PREFIX
EOF
exit 1 ;;
esac
done
# If cross-compiling, don't search for libraries automatically; only
# use curl and/or xview if specified on the command line.
if [ "x$HOST" != "x" ]
then
if [ "x$NETLIB" = "xunknown" ]
then
NETLIB=none
fi
if [ "x$WAVE" = "xunknown" ]
then
WAVE=0
fi
fi
echo "Checking the operating system type ..."
case x$HOST in
x) MACHINE=`uname -m | tr -d " "`
KERNEL=`uname -s | tr -d " "`
;;
x*-*-*) MACHINE=`echo $HOST | cut -d- -f1`
KERNEL=`echo $HOST | cut -d- -f3-`
;;
x*-*) MACHINE=`echo $HOST | cut -d- -f1`
KERNEL=`echo $HOST | cut -d- -f2-`
;;
x*) MACHINE=unknown
KERNEL=$HOST
;;
esac
ARCH=$MACHINE-$KERNEL
case `echo $KERNEL | tr A-Z a-z` in
linux*) case $MACHINE in
x86_64) OS=Linux-64 ;;
*) OS=Linux ;;
esac ;;
freebsd*) OS=FreeBSD ;;
solaris*) OS=Solaris ;;
sunos*) OS=Solaris ;;
hp-ux*) OS=HPUX ;;
cygwin*) if [ "x$NOCYGWIN" = "xyes" ]
then
OS=mingw-compat
T=`echo $ARCH | sed s/CYGWIN/MINGW/`
ARCH=$T
else
OS=cygwin
fi ;;
mingw*) OS=mingw
T=`echo $ARCH | sed s/CYGWIN/MINGW/`
ARCH=$T ;;
darwin*) OS=Darwin ;;
*) OS=generic ;;
esac
echo "Configuring the WFDB software package for $OS."
SRCDIR="`pwd`"
LIB=lib
cd conf
echo "Checking the echo command ..."
echo -n >echo.out
if [ -s echo.out ]
then
ln -sf prompt-c prompt
else
ln -sf prompt-n prompt
fi
rm echo.out
PACKAGE=`basename "$SRCDIR"`
VERSION=
if [ -d ../.git ]
then
./prompt "Checking the package version number ..."
VERSION=`cd ..; git --git-dir=.git describe --dirty 2>conf/gitver.t1`
rm -f gitver.t1
if [ "x$VERSION" = "x" ]
then
echo "unknown"
else
echo "$VERSION"
fi
fi
if [ "x$VERSION" = "x" ]
then
VERSION=`echo "$PACKAGE" | sed s/^wfdb-//`
fi
MAJOR=
MINOR=
RELEASE=
VNUM=`echo "$VERSION" | sed 's/[^0-9.].*//'`
case $VNUM in
*.*.*) MAJOR=`echo $VNUM | cut -d . -f 1`
MINOR=`echo $VNUM | cut -d . -f 2`
RELEASE=`echo $VNUM | cut -d . -f 3` ;;
*) ./prompt "Major version number: "; read MAJOR
./prompt "Minor version number: "; read MINOR
./prompt "Release number: "; read RELEASE
VERSION=$MAJOR.$MINOR.$RELEASE ;;
esac
if [ "x$MAJOR" = "x" ]; then MAJOR=0; fi
if [ "x$MINOR" = "x" ]; then MINOR=0; fi
if [ "x$RELEASE" = "x" ]; then RELEASE=0; fi
sed s/VMAJ/$MAJOR/ <version.def | sed s/VMIN/$MINOR/ | \
sed s/VREL/$RELEASE/ | sed "s/VTAG/$VERSION/" >site.def
echo "# Definitions generated by 'configure'" >>site.def
echo >>site.def
echo "PACKAGE = $PACKAGE" >>site.def
echo "SRCDIR = \"$SRCDIR\"" >>site.def
if [ "x$SOURCE_DATE_EPOCH" = "x" ]
then
date=date
else
if date -d @0 >date.t1 2>date.t1
then
date="date -u -d @$SOURCE_DATE_EPOCH"
else
date="date -u -r $SOURCE_DATE_EPOCH"
fi
bd=`$date '+"%b %e %Y"'`
echo "BUILD_DATE_FLAGS = -DWFDB_BUILD_DATE='$bd'" >>site.def
rm -f date.t1
fi
echo LONGDATE = `$date "+%e %B %Y"` >>site.def
echo SHORTDATE = `$date "+%B %Y" | tr a-z A-Z` >>site.def
echo YEAR = `$date "+%Y"` >>site.def
echo "ARCH = $ARCH" >>site.def
if [ "x$HOST" = "x" ]
then
echo "BUILD_CC = \$(CC)" >> site.def
else
echo "BUILD_CC = cc" >> site.def
fi
echo "# _____________________________________________________________________________" >>site.def
echo >>site.def
rm -f site-slib.def
touch site-slib.def
case $OS in
Linux)
cat site.def linux-slib.def >site-slib.def
cat linux.def >>site.def ;;
Linux-64)
if [ "x$MFLAGS" = "x-m32" ]
then
OS=Linux
cat site.def linux-slib.def | \
sed "s+MFLAGS =+MFLAGS = $MFLAGS+" >site-slib.def
cat linux.def | \
sed "s+MFLAGS =+MFLAGS = $MFLAGS+" >>site.def
else
LIB=lib64
WAVE=0
cat site.def linux-slib.def >site-slib.def
cat linux.def >>site.def
fi ;;
FreeBSD)
cat site.def freebsd-slib.def >site-slib.def
cat freebsd.def >>site.def ;;
Solaris)
cat site.def solaris-slib.def >site-slib.def
cat solaris.def >>site.def ;;
HP-UX)
cat site.def hpux-slib.def >site-slib.def
cat hpux.def >>site.def ;;
cygwin)
LIB=bin
cat site.def cygwin-slib.def >site-slib.def
cat cygwin.def >>site.def ;;
mingw)
LIB=bin
WAVE=0
sed 's/NOCYGWIN//' site.def mingw-slib.def >site-slib.def
sed 's/NOCYGWIN//' mingw.def >>site.def
( cd ../checkpkg; ./dosify ) ;;
mingw-compat)
LIB=bin
OS=mingw
WAVE=0
sed 's/NOCYGWIN/-mno-cygwin/' site.def mingw-slib.def >site-slib.def
sed 's/NOCYGWIN/-mno-cygwin/' mingw.def >>site.def ;;
Darwin)
echo "It is normal for Mac OS X to be recognized as Darwin."
LMFLAGS=$MFLAGS
WMFLAGS=$MFLAGS
for a in $ARCHLIST
do
LMFLAGS="$LMFLAGS -arch $a"
case $a in
i386|ppc) WMFLAGS="$WMFLAGS -arch $a" ;;
esac
done
if [ $WAVE = unknown ] && [ "x$WMFLAGS" = "x$MFLAGS" ]
then
WAVE=0
fi
cat site.def darwin-slib.def | \
sed "s+^MFLAGS =+MFLAGS = $LMFLAGS+" >site-slib.def
cat darwin.def | \
sed "s+^MFLAGS =+MFLAGS = $LMFLAGS+;s+^WMFLAGS =+WMFLAGS = $WMFLAGS+" >>site.def ;;
*) OS=generic
cat site.def generic-slib.def >site-slib.def
cat generic.def >>site.def
echo "Using the generic configuration, which may need to be customized"
echo "for your operating system. 'configure' will offer suggestions"
echo "for customization after it completes the generic configuration."
;;
esac
if [ -s site-slib.def ]
then
if [ x$LIBTYPE = x ]
then
echo
echo "The WFDB library may be compiled as a static library or as a"
echo "dynamically loaded (shared) library (the default). Type S for a"
./prompt "static library, or D for a dynamically loaded library:"
read LIBTYPE
fi
else
LIBTYPE=static
fi
case x$LIBTYPE in
xS*|xs*) rm -f site-slib.def
touch site-slib.def
LIBTYPE=static ;;
*) LIBTYPE=dynamic ;;
esac
if [ $LIBTYPE = static ]
then
if [ x$SYSLIBS = x ]
then
echo
echo "You may link the WFDB applications to dynamically loaded"
echo "system libraries (such as the standard C library) to"
echo "save disk space and for faster loading even while using"
echo "the static WFDB library, or you may link them to static"
echo "libraries only, which will make them easier to copy to"
echo "other systems. Note that choosing to link to static"
echo "libraries only may cause compilation to fail if your"
echo "system does not have a complete set of static libraries."
echo "Type S to link to static libraries only, or D to link to"
./prompt "dynamically loaded libraries where available:"
read SYSLIBS
fi
case x$SYSLIBS in
xS*|xs*) sed "s/LDFLAGS = -L/LDFLAGS = -static -L/" <site.def >site.tmp
mv site.tmp site.def
echo "Applications will be linked with static libraries only."
SYSLIBS=static
;;
*) SYSLIBS=dynamic ;;
esac
else
SYSLIBS=dynamic
dynamic_ldflags=`grep '^LDFLAGS =' site-slib.def | sed 's/LDFLAGS = *//'`
if [ "x$dynamic_ldflags" != "x" ]; then
sed "s|^LDFLAGS =.*|LDFLAGS = $dynamic_ldflags|" <site.def >site.tmp
mv site.tmp site.def
fi
fi
echo
./prompt "Looking for the C compiler ..."
if [ "x$HOST" != "x" ]
then
CROSS_COMPILE=$HOST-
fi
WCC=`which ${CROSS_COMPILE}gcc 2>&1`
if [ "x$WCC" = "x" ]
then
WCC="no gcc"
fi
if ( echo $WCC | egrep "no |not |unknown " >wcc.t1 )
then
WCC=`which ${CROSS_COMPILE}cc 2>&1`
if [ "x$WCC" = "x" ]
then
WCC="no cc"
fi
if ( echo $WCC | egrep "no |not |unknown " >wcc.t2 )
then
echo "not found"
echo
echo "The WFDB software cannot be compiled, because there does not"
echo "appear to be a C compiler installed on this system. Please"
echo "install one, be sure that it is in your PATH, and that it is"
echo "accessible as either '${CROSS_COMPILE}cc' or '${CROSS_COMPILE}gcc', then run ./configure again."
cd ..
exit 1
else
CC=${CROSS_COMPILE}cc
wflags=
fi
else
CC=${CROSS_COMPILE}gcc
wflags="-Wno-implicit -Wformat "
fi
echo "$CC"
sed "s|CC = gcc|CC = $CC|" <site.def >site.tmp
sed "s|^CFLAGS = |CFLAGS = $wflags|" <site.tmp >site.def
sed "s|CC = gcc|CC = $CC|" <site-slib.def >site.tmp
sed "s|^CFLAGS = |CFLAGS = $wflags|" <site.tmp >site-slib.def
rm -f wcc.t1 wcc.t2 site.tmp
./prompt "Looking for the command to strip debugging metadata ..."
WSTRIP=`which ${CROSS_COMPILE}strip 2>&1`
if [ "x$WSTRIP" = "x" ]
then
WSTRIP="no strip"
fi
if ( echo $WSTRIP | egrep "no |not |unknown " >wstrip.t1 )
then
STRIP=:
echo "not found"
else
STRIP=${CROSS_COMPILE}strip
echo "$STRIP"
fi
rm -f wstrip.t1
if [ "x$STRIP" != "xstrip" ]
then
sed "s|^STRIP = .*|STRIP = $STRIP|" <site.def >site.tmp
mv site.tmp site.def
sed "s|^STRIP = .*|STRIP = $STRIP|" <site-slib.def >site.tmp
mv site.tmp site-slib.def
fi
if [ $LIBTYPE = static ] && [ "x${CROSS_COMPILE}" != "x" ]
then
sed "s|^RANLIB = ranlib|RANLIB = ${CROSS_COMPILE}ranlib|" <site.def >site.tmp
mv site.tmp site.def
fi
if [ x$DIR = x ]
then
echo
echo "Where do you wish to install the WFDB Software Package?"
echo "It will be installed in subdirectories of WFDBROOT (by default,"
echo "WFDBROOT is /usr, so that files are installed in /usr/bin,"
echo "/usr/include, /usr/$LIB, etc.). Other reasonable choices for"
echo "WFDBROOT are /usr/local, /opt, or your home directory ($HOME)."
echo "The value of WFDBROOT must be a full pathname (beginning with '/',"
echo "but without a '/' at the end). If the subdirectories (bin, include,"
echo "lib, ...) of WFDBROOT don't exist, they will be created as necessary."
echo
DIR=
while [ x$DIR = x ]
do
./prompt "Choose a location, or press <Enter> to install in /usr:"
read DIR
case x$DIR in
x/usr) ;;
x) DIR=/usr ;;
x*/) DIR=
echo "Please type the path again, omitting the '/' at the end." ;;
x/*) ;;
x*) DIR=
echo "Please enter an absolute pathname, beginning with '/'." ;;
esac
done
fi
case $DIR in
/usr) ;;
/*) sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <site.def >site.tmp
mv site.tmp site.def
sed "s+^WFDBROOT = /usr+WFDBROOT = $DIR+" <site-slib.def \
>site.tmp
mv site.tmp site-slib.def
esac
echo "The WFDB software will be installed in '$DIR'."
if [ x$LIBDIR = xunknown ]
then
case $OS in
Linux*)
nativelibdirs=`$CC -print-search-dirs | sed -n '/^libraries:/{s/^[^=]*=//; s/:/\n/g; p}' | sed ':LP; s+/[^/]*/\.\./+/+; tLP; s+/$++'`
if [ "$MACHINE" = "x86_64" ] && echo "$nativelibdirs" | grep -q "^$DIR/lib64"; then
if [ "x$MFLAGS" = "x-m32" ]; then
LIB=lib
else
LIB=lib64
fi
else
if [ "x$MFLAGS" = "x-m32" ]; then
LIB=lib32
else
LIB=lib
fi
fi ;;
esac
LIBDIR="\$(WFDBROOT)/$LIB"
fi
sed "s+^LIBDIR = .*+LIBDIR = $LIBDIR+" <site.def >site.tmp
mv site.tmp site.def
sed "s+^LIBDIR = .*+LIBDIR = $LIBDIR+" <site-slib.def >site.tmp
mv site.tmp site-slib.def
xlibdir=`echo "$LIBDIR" | sed 's+$(WFDBROOT)+'"$DIR"+`
MANTMP=`grep "MANDIR =" site.def |sed 's+$(WFDBROOT)/++' |cut -d " " -f 3`
MANDEF=$DIR/$MANTMP
if [ x$MANDIR = xunknown ]
then
MANDIR=$MANDEF
fi
if [ x$MANDIR = x ]
then
echo
echo "Where do you wish to install the manual pages?"
echo "They will be installed in subdirectories of MANDIR (by default,"
echo "MANDIR is '$MANDEF'). If you install them in a non-standard"
echo "directory, you will need to add that directory to your MANPATH."
echo "The value of MANDIR must be a full pathname (beginning with '/',"
echo "but without a '/' at the end). If the subdirectories (man1, man3,"
echo "man5, ...) of MANDIR don't exist, they will be created as necessary."
echo
MANDIR=
while [ x$MANDIR = x ]
do
./prompt "Choose a location, or press <Enter> to install in $MANDEF:"
read MANDIR
case x$MANDIR in
x/usr) ;;
x) MANDIR=$MANDEF ;;
x*/) MANDIR=
echo "Please type the path again, omitting the '/' at the end." ;;
x/*) ;;
x*) MANDIR=
echo "Please enter an absolute pathname, beginning with '/'." ;;
esac
done
fi
if [ "$MANDIR" != "$MANDEF" ]
then
sed "s+^MANDIR = $MANDEF+MANDIR = $MANDIR+" <site.def >site.tmp
mv site.tmp site.def
fi
echo "The manual pages will be installed in '$MANDIR'."
echo
# Search for NETLIB if not specified on the command line
if [ x$NETLIB = xunknown ]
then
./prompt "Looking for libcurl ..."
WHICH=`which curl-config 2>&1`
if [ "x$WHICH" = "x" ]
then
WHICH="no curl-config"
fi
if ( echo $WHICH | egrep "no |not |unknown " >which.t1 )
then
echo "not found"
echo "The WFDB software will be compiled without NETFILES"
echo "access, because libcurl does not appear to be"
echo "installed on this system. To add NETFILES access,"
echo "install libcurl and run ./configure again."
NETLIB=none
else
echo "found"
echo "The WFDB software will be compiled with NETFILES access"
echo "using libcurl."
NETLIB=libcurl
fi
rm -f which.t1 which.t2
fi
case $NETLIB in
libcurl) LC="\`curl-config --cflags\`"
LL="\`curl-config --libs\`"
NETFILES=1
NETFILES_LIBCURL=1
VIANF=" via libcurl"
WITHNF=with
;;
none) LC=""
LL=""
NETFILES=0
NETFILES_LIBCURL=0
VIANF=""
WITHNF=without
;;
esac
echo "NETFILES=$NETFILES" >../config.cache
echo "NETFILES_LIBCURL=$NETFILES_LIBCURL" >>../config.cache
sed "s/WFDB_NETFILES 1/WFDB_NETFILES $NETFILES/" < ../lib/wfdb.h0 | \
sed "s/WFDBMAJOR/$MAJOR/" | \
sed "s/WFDBMINOR/$MINOR/" | \
sed "s/WFDBRELEASE/$RELEASE/" | \
sed "s/WFDB_NETFILES_LIBCURL 1/WFDB_NETFILES_LIBCURL $NETFILES_LIBCURL/" \
>../lib/wfdb.h
if [ $NETLIB != "none" ]
then
sed "s/LC =/LC = $LC/" <site.def | sed "s/LL =/LL = $LL/" >site.tmp
mv site.tmp site.def
fi
sed "s/LC =/LC = $LC/" <site-slib.def | sed "s/LL =/LL = $LL/" >site.tmp
mv site.tmp site-slib.def
cd ..
echo
echo "Creating Makefile in lib ..."
if [ -s conf/site-slib.def ]
then
cat lib/Makefile.top conf/site-slib.def lib/Makefile.tpl >lib/Makefile
else
cat lib/Makefile.top conf/site.def lib/Makefile.tpl >lib/Makefile
fi
for D in app checkpkg convert data doc doc/wag-src doc/wpg-src doc/wug-src \
examples fortran psd wave waverc xml .
do
if [ -s $D/Makefile.top ]
then
echo "Creating Makefile in $D ..."
cat $D/Makefile.top conf/site.def $D/Makefile.tpl >$D/Makefile
fi
done
# Create output directories for documentation
for D in doc/wag doc/wpg doc/wug
do
[ -d $D ] || mkdir $D
done
echo rm conf/site.def conf/site-slib.def
if [ "x$WAVE" = "xunknown" ]
then
echo
conf/prompt "Looking for the XView libraries ..."
TEXTEDIT=`which textedit 2>&1`
if [ "x$TEXTEDIT" = "x" ]
then
TEXTEDIT="no textedit"
fi
if [ -d $OWHOME ]
then
WAVE=1;
elif [ -d /usr/local/openwin ]
then
WAVE=1;
OWHOME=/usr/local/openwin
elif [ -d /opt/openwin ]
then
WAVE=1;
OWHOME=/opt/openwin
elif [ -d /usr/include/xview ]
then
WAVE=1;
OWHOME=/usr
elif ( echo $TEXTEDIT | egrep "no |not |unknown " >textedit.t1 )
then
WAVE=0;
else
WAVE=1;
TEDIR=`dirname $TEXTEDIT`;
OWHOME=`dirname $TEDIR`;
fi
rm -f textedit.t1
if [ $WAVE = 0 ]
then
echo "not found"
echo "WAVE will not be compiled, because the XView libraries do not"
echo "appear to be installed on this system."
echo "To compile WAVE, install XView, add the directory containing the"
echo "XView textedit application to your PATH, and run ./configure again."
else
echo "found"
fi
fi
if [ "x$WAVE" = "x1" ]
then
sed "s+/usr/openwin+$OWHOME+" <wave/Makefile >tmp.$$
mv tmp.$$ wave/Makefile
WAVECOMP="WAVE will be compiled and installed in '$DIR/bin'."
echo "WAVE=1" >>config.cache
else
cp -p wave/nomake wave/Makefile
cp -p wave/nomake waverc/Makefile
echo "WAVE=0" >>config.cache
WAVECOMP="WAVE will not be compiled."
fi
# Clean up old *.o files in lib, to avoid possibly using binaries intended
# for a shared library in a static library or vice versa.
rm -f lib/*.o
if [ $DIR != "/usr" -a $LIBTYPE = dynamic ]
then
cat <<EOF
IMPORTANT: You have chosen to build a dynamic (shared) WFDB library in
a directory, $DIR/$LIB, that is not normally searched for such
libraries. In order to use the applications that will be compiled
with this library, it may be necessary to add this directory to your
LD_LIBRARY_PATH. If your shell is csh or a variant, do this by
typing:
EOF
if [ "x$LD_LIBRARY_PATH" = x ]
then
echo " setenv LD_LIBRARY_PATH $DIR/$LIB"
echo "Otherwise, do this by typing:"
echo " LD_LIBRARY_PATH=$DIR/$LIB"
echo " export LD_LIBRARY_PATH"
else
echo " setenv LD_LIBRARY_PATH \${LD_LIBRARY_PATH}:$DIR/$LIB"
echo "Otherwise, do this by typing:"
echo " LD_LIBRARY_PATH=\${LD_LIBRARY_PATH}:$DIR/$LIB"
echo " export LD_LIBRARY_PATH"
fi
fi
if [ $OS = generic ]
then
cat <<EOF
No specific configuration information is available for your operating
system. Please try compiling using the generic Makefiles that have
been generated by this configuration utility. If there are problems,
it may be possible to solve them by customizing conf/generic.def (and
conf/generic-slib.def if you are attempting to compile a shared WFDB
library). Run ./configure again after making any necessary changes to
these files. Please send reports of success or failure, together with
the output of the command 'uname -a', and copies of any files you have
changed, to:
wfdb@physionet.org
EOF
fi
if [ "x$MFLAGS" != x ]
then
CC="$CC $MFLAGS"
fi
cat <<EOF
Summary:
$PACKAGE-$OS is now ready to be compiled using '$CC'.
The WFDB library will be compiled as a $LIBTYPE library $WITHNF NETFILES
access${VIANF}, and it will be installed in '$xlibdir'.
The WFDB library .h files will be installed in '$DIR/include/wfdb'.
The WFDB applications will be linked to $SYSLIBS system libraries, and
they will be installed in '$DIR/bin'.
$WAVECOMP
Manual pages will be installed in subdirectories of '$MANDIR'.
Sample data files will be installed in '$DIR/database', which
will be included in the default WFDB path.
If you need to compile a different WFDB library type, or install into different
directories, rerun this script with its "-i" (interactive) option:
./configure -i
Other options can be viewed by rerunning this script with its "-h" option:
./configure -h
WFDB software configuration is complete.
Now run 'make' to compile and test, followed by 'make install' to recompile
and install the software, man pages, and example data. Finally, run
'make check' to verify that the installation is complete and successful.
EOF